Lower Density
      Back to home
      1. TestFit Knowledge Base
      2. Site Solver Typologies
      3. Lower Density

      Low Density housing

      lower density presets

      Duplexes, Single Family, and Townhomes are all essentially the same with the building configuration defined by the Townhouses section of the housing panel. 

      Controlling the distance between buildings

      Distance between buildings is controlled by the row gap and back-to-back buffers.

      The row gap buffer is on the housing panel, while the back-to-back buffer is on the drive panel.

      Enabling Garages, Endcaps, and Balconies

      Garages, Endcaps, and Balconies are all controlled in the Dynamic Units panel in housing.