Townhome Manual Mode

---

Accessing Manual Mode

There are a couple ways to access Manual Mode.

1. Click on the building you want to edit until you see a grey grip in the corner or click on the Low Density Housing layer in the Navigation Tree:
   
   
   
   
2. You can now either click a building you want to edit, or click the add item button, and select Townhouse row.
   
3. To rotate a row of townhomes: right click+hold on the handle, rotate to desired orientation 

   ---

Adding/Modifying Drive Aisles

With the Townhomes layer selected you can perform the following operations:

1. Add new drive aisles: click on the blue spline and draw in your new road. Click+hold on a node to move the drive aisle.
   

Right click on the spline to remove units from either side of the drive aisle or to manually adjust the aisle type of a single road.

---

Removing Manual Edits

Once a manual edit has been performed you'll notice a red M in the nav-tree at the end of the respective layer. Click the red M to remove the edits and return  the site to it's original solve.

 

---